Argh, more than 2TB disk causes problems?
Here’s the tech scenario: I now have seven active Seagate Barracuda SATA2 500GB drives in a RAID5 array, using a Highpoint RocketRAID 2320 card. This setup gives a total capacity of 3TB and can survive one drive completely dying.
Under Windows, drives are formatted with a Master Boot Record partition map. This format imposes a 2TB limitation on allocatable space within a volume. I was unaware of this limit when I set up the RAID card, and am now paying the price.
The problem is that now, I have 750GB of unallocatable space on my RAID volume. I can’t extend the existing partition or even create a new one, with a wonderfully incomprehensible error message leading the way.
Supposedly, this problem can be fixed by using a GUID Partition Table (GPT) setup. Unfortunately, GPT conversion requires an empty volume - and I have 2TB of data that can’t really be moved anywhere else.
Anyone know of a utility (open source, freeware, paid) to convert MBR to GPT? I’ve actually read the GPT specification and it doesn’t seem too difficult to implement, but I really don’t want to get into hex editing the raw disk for various reasons.
Neil Feiereisel:
I have used HighPoint RocketRAID cards with large capacity drives (12 x 1 TB = 12 TB in RAID 0), and had no problems with Windows XP as long as you increase the sector size in the HighPoint RAID config utility. 512 byte sectors will get you 2 TB max. 1k will give you 4 TB, etc. This is due to a limitation in Windows for the number of bits they use to represent the size of a partition. By increasing the sector size, you effectively get a larger partition with the same number of bits. I was doing this with an extra drive that is separate from the OS drive.
We’re using the newest 16-port HW RAID card (they just released it).
Good luck,
July 22, 2008, 10:22 amNeil
Jake Billo:
Thanks Neil! If you’re still following this, can you point me to exactly where in the HighPoint utility one would go to change the sector size? The documentation is a bit sparse on this point.
July 23, 2008, 12:31 amJake Billo:
Ah, wait, you probably mean the BIOS-based utility and not the Windows admin UI? After reading some documentation, it looks like I might have to update the card to take advantage of it.
Not a problem; I’ll just have to do it tomorrow afternoon when I can reboot the box and find the hptflash utility.
July 23, 2008, 12:50 am